Alco HH-600

Somebody's Large Digital Image Here
Data Sheet Information Compiled by: JEAN-DENIS BACHAND
New: 11 May 2005 Drawing by: Jean-Denis Bachand
-
Engine Builder: Alco Engine: 4-cycle Model 531 6L
Bore & Stroke 12.5" X 13.0"
RPM (Maximum / Minimum) 700 / 300
Main Generator: GE - GT 526 / 551A1 Horsepower: 600
Gear Ratio: 68:16 Speed: 40 mph
Trucks: Blunt 4-Wheel Configuration: B-B
Traction Motor Blowers: Electrical Driven (2) Model: ?
Weight: 206,120 lbs Traction Motors: GE 287D/E (four)
Tractive Effort (starting) 59,700 @ 25% Tractive Effort (continuous): 28,000 lbs @ 4.8 mph
Multiple Unit Capability: No Dynamic Braking: -
Auxilary Generator: -- Alternator: --
Air Brake: Westinghouse Model: 14EL
Compressor: GE Model: CP26
Quantity Built: -- Dates: --
- -
Exterior Dimensions HH-600
Total Length 43'-05"
Pilot to Pilot 39'-05"
Wheel Diameter 40"
Truck Wheel Base 8'-00"
Height to Top Engine Hood 14'-05 3/4"
Height to Top Cab Hood 14'-05 3/4"
Cab Width 10'-00"
Top Walkway Width 9'-07 1/2"
Walkway Width 5'-00"
Engine Hood Width 9'-10"
Center Bolster 20'-02"
Center Front Truck to Front Pilot 2'-06"
Center Rear Tucrk to Rear Pilot 1'-09"
Distance between Truck Centers 29'-08"
Minimum Turning Radious 50 degrees
- -
Fuel Oil: 635 Lubricating Oil: 80
Engine Cooling Water: 50 Sand Capacity: 27 cu. ft.
Options: -
- -
Reference Sources:
  • Extra 2200 South Issue #35
  • The Diesel Builders, Vol. 2, by John F. Kirkland

Back to Data Sheets Index

Back to Alco Power