Alco HH-300 |
 |
| Data Sheet Information Compiled by: JEAN-DENIS BACHAND |
| New: 11 May 2005 |
Drawing by: Jean-Denis Bachand |
| - |
| Engine Builder: McIntosh |
Engine: 4-cycle Model 330 6L |
| Bore & Stroke |
9" X 10.5" |
| RPM (Maximum / Minimum) |
700 / 250 |
| Main Generator: GE - DT-40 |
Horsepower: 300 |
| Gear Ratio: 68:16 |
Speed: 40 mph |
| Trucks: Blunt 4-Wheel |
Configuration: B-B |
| Traction Motor Blowers: Belt Driven (1) |
Model: ? |
| Weight:132,000 lbs |
Traction Motors: GE 297A (four) |
| Tractive Effort (starting) 36,000 @ 25% |
Tractive Effort (continuous):7,900 lbs @ 10 mph |
| Multiple Unit Capability: No |
Dynamic Braking: - |
| Auxilary Generator: -- |
Alternator: -- |
| Air Brake: Westinghouse |
Model: 14EL |
| Compressor: GE |
Model: CP26 |
| Quantity Built: --
|
Dates: -- |
| - |
- |
| Exterior Dimensions
| HH-300 |
| Total Length |
32'-08" |
| Pilot to Pilot |
28'-02" |
| Wheel Diameter |
36" |
| Truck Wheel Base |
7'-02" |
| Height to Top Engine Hood |
11'-09 1/2" |
| Height to Top Cab Hood |
13'-09 1/2" |
| Cab Width |
9'-06" |
| Top Walkway Width |
6'-07" |
| Walkway Width |
5'-00" |
| Engine Hood Width |
9'-04" |
| Center Bolster |
13'-09 1/2" |
| Center Front Truck to Front Pilot |
3'-09" |
| Center Rear Tucrk to Rear Pilot |
3'-09" |
| Distance between Truck Centers |
17'-00" |
| Minimum Turning Radious |
57 degrees |
| -
| - |
| Fuel Oil: 635
| Lubricating Oil: 80 |
| Engine Cooling Water: 50
| Sand Capacity: 27 cu. ft. |
| Options: - |
| - |
- |
Reference Sources:
- Web Site " Yard Limit"
- The Diesel Builders, Vol. 2, by John F. Kirkland
|