Alco C-636 (DL-636) |
 |
| Data Sheet Information Compiled by: Jean-Denis Bachand |
| New: 13 April 2005 |
Drawing by: Jean-Denis Bachand |
| - |
| Engine Builder: Alco Products |
Engine: 4-cycle Model 251E V16 |
| Bore & Stroke |
9" X 10.5" |
| RPM (Maximum / Minimum) |
1100 / 400 |
| Main Generator: GE GTA11 |
Horsepower: 3600 |
| Gear Ratio: 74:18 |
Speed: 65 mph |
| Trucks Hi-Adhesion (6-Wheel) |
Configuration: C-C |
| Traction Motor Blowers: Mechanical Driven (2) |
Model: Sturt |
| Weight: 420,000 lbs |
Traction Motors: GE 752 (Six) |
| Tractive Effort (starting) 81,150 lbs @ 25% |
Tractive Effort (continuous): 79,500 lbs @ 12 mph |
| Multiple Unit Capability: Yes |
Dynamic Braking: Yes |
| Auxilary Generator: GE |
Alternator: -- |
| Air Brake: Westinghouse |
Model: 26L |
| Compressor: Westinghouse |
Model: 3CDC |
| Quantity Built: 64
|
Dates: 11/1969 to 12/1970 |
| - |
- |
| Exterior Dimensions
| C-636 |
| Total Length |
69'-06" |
| Pilot to Pilot |
60'-02" |
| Wheel Diameter |
40" |
| Truck Wheel Base |
13'-07" |
| Height to Top Engine Hood |
15'-01" |
| Height to Top Cab Hood |
15'-01" |
| Cab Width |
10'-01" |
| Top Walkway Width |
9'-04" |
| Walkway Width |
5'-01" |
| Engine Hood Width |
9'-11" |
| Center Bolster |
41'-10" |
| Center Front Truck to Front Pilot |
7'-00" |
| Center Rear Tucrk to Rear Pilot |
7'-00" |
| Distance between Truck Centers |
54'-06" |
| Minimum Turning Radious |
21 degrees |
| -
| - |
| Fuel Oil: 3200
| Lubricating Oil: 330 |
| Engine Cooling Water: 340
| Sand Capacity: 56 cu. ft. |
| Options: |
Reference Sources:
- Railroad Model Craftsman, January 1985 and April 1086
- Alco Design Data
|