EMD G26CW | ||
|---|---|---|
 | ||
| Data Sheet Information Compiled by: JEAN-DENIS BACHAND | ||
| Revised: 15 July 2007 | Artwork by: Jean-Denis Bachand | |
| - | ||
| Engine Builder: EMD | Engine: 645E 16-cylinder | |
| Bore & Stroke | 9.02" X 10" | |
| RPM (Maximum / Minimum) | 900 / 316 | |
| Main Generator: GM - AR6 | Horsepower: 2000 | |
| Gear Ratio: 62:15 | Speed: 65 mph | |
| Trucks: 6-Wheel | Configuration: C-C | |
| Traction Motor Blowers: Delco Electric Drive (4) | Model: GM | |
| Weight: 193,900 lbs | Traction Motors: Six GM - D77 | |
| Tractive Effort (starting) 57,960,000 lbs @ 25% | Tractive Effort (continuous): 50,400 lbs @ 12 mph | |
| Multiple Unit Capability: Yes | Dynamic Braking: Optional | |
| Auxilary Generator: Delco A8102 | Alternator: GM D18 | |
| Air Brake: Westinghouse | Model: 24RL | |
| Compressor: Gardner-Denver | Model: WXO | |
| Quantity Built: Not Available | Dates: 1975 to Present | |
| - | - | |
| Exterior Dimensions | G26CW | |
| Distance between End Sills | 51'-08.65" | |
| Wheel Diameter | 40" | |
| Truck Wheel Base | 12'-02" | |
| Overall Height | 12'-06.7" | |
| Height to Top Engine Hood | 13'-00.5" | |
| Height to Top Cab | 13'-00.5" | |
| Width over Handrails | 9'-03" | |
| Engine Hood Width | 9'-00" | |
| Top of Walkway | 8'-01" | |
| Walkway Width | 2'-00" | |
| Distance between Bolster Centers | 32'-08.65" | |
| Distance from End Sill to Centerline of Bolster | 9'-10" | |
| Minimum Turning Radious | 21 degrees | |
| - | - | |
| Fuel Oil: 750 | Lubricating Oil: 200 | |
| Engine Cooling Water: 220 | Sand Capacity: 9 cu. ft. | |
| Options: Vapor Clarkson Boiler #4625 (@ 2500 lbs./hr.) | ||
| - | ||
Reference Sources:
Additional information from: Roberto Pirazzoli | ||